Skip to content
Menu Close
Home News Award: MicroClear MBR for Dairy and Meat Processing Plant

Award: MicroClear MBR for Dairy and Meat Processing Plant

Newterra has been awarded a project to treat waste water from a Dairy and Meat Processing facility in Barbados. The high strength, lower flow plant will be provided withing the short timeframe available to the customer. The MicroClear MBR plant will process about 11,000 GPD (40m3/d).

The system will be provide in 4 factory built and tested containerized modules and will provide inlet screening, DAF (Dissolved Air Flotation), biological treatment, odor control and MicroClear Membranes.

Continue Reading

A pile of gravel and refuse sits in a processing facility

Difficulty With Accurate Testing For BOD In Industrial Stormwater Runoff

Biochemical oxygen demand (BOD) is a measure of the amount of dissolved oxygen used by microorganisms to break down organic material in a sample of water. Because BOD is not one specific pollutant, it can be difficult to characterize the nature of BOD, identify the source in stormwater runoff, and select the appropriate treatment approach to reduce BOD in stormwater runoff and discharge. The most effective way to minimize BOD concentrations in stormwater discharges will be to minimize the exposure of stormwater to materials that are a source of BOD. 

Woman filling glass with water from tap in kitchen, closeup

What is PFAS?

PFOA (perfluorooctanic acid) and PFOS (perflurooctane sulfonate) are organic synthetic chemicals that have been used in manufacturing a multitude of industrial and consumer-based products including coatings, carpeting, and fire-fighting foams. Over several decades, they have contaminated the environment, specifically our drinking water sources, causing significant health concerns that recently prompted the EPA to take action.

Close-up of black activated carbon texture. Coconut charcoal.

What is Activated Carbon?

Although the term granular activated carbon is used generically, it can refer to dozens of similar – but not identical- adsorbents. Depending on raw material, method and degree of activation and other factors, activated carbons can perform differently in various applications.