Newterra Helps A Company “Clean Up” Their Environmental Efforts

CHALLENGE

Calbag Metals Co. is a 4-acre non-ferrous metal recycling facility located in Portland, Oregon. The metal recycling facility had been using catch basin inserts along with an oil/water separator and a cartridge filter with compost media, to treat the site’s stormwater prior to discharge. Though the cartridge filter noticeably reduced contaminants in Calbag’s stormwater discharge, it was not able to achieve adequate copper or zinc removal to meet the site’s stormwater permit requirements.

SOLUTION

Newterra supplied Calbag Metals with a Clara® 25C, Backwashing Sand Filter and Aquip® 160SBE system; the Aquip enhanced stormwater filtration system was specifically designed for Calbag Metals using historic stormwater sampling data from the site as well as the known pollutants commonly found in scrap yard stormwater runoff. Aquip is an industrial stormwater filtration system containing both inert and sorptive media to remove total suspended solids and metals. Also specifically designed into the Aquip is its ability to easily integrate into existing facilities with minimal construction cost. This is due to its relatively small footprint, above ground configuration, and passive (gravity operated) flow[1]through design.

Prior to the Aquip is an oil/water separator to reduce oil and grease and Retenu basic stormwater filtration system to reduce particulates. With the treatment train approach, the stormwater runoff first passes through the oil/water separator for oil reduction then through Retenu for additional filtration of particulates prior to discharge into the enhanced portion of the treatment train (Aquip). The result is more efficient and effective pollutant reduction.

Newterra manufactures industrial stormwater treatment Best Management Practices (BMPs) for customers throughout North America. Products include the Clara settling system, Aquip stormwater filtration system, and Purus™ stormwater polishing system.

RESULTS

“After years of struggling to stay below permit benchmarks, despite consistent effort and all the right BMPs, we didn’t quite believe Newterra was going to get us there – until we saw our first sampling results. The Aquip filter has vastly outperformed our previous filter system, and brought us into full compliance. We’re now anticipating installation of an Aquip system at our Tacoma yard.”

— Management, Calbag Metals Co., Portland OR